TMI 49-85 Digital Micrometer for Paper
The TMI 49-85 Digital Micrometer is designed to measure the thickness or caliper of paper sheets and cardboard, compliant with TAPPI T411.
Description
The Digital Micrometer 49-85 was designed specifically for the paper industry, meeting the single-sheet thickness and variation requirements of TAPPI T 411 (the international specification and test standard for paper and board).
The 49-85 Digital Micrometer is protected with a heavy, solid frame, which houses the reflective linear encoder and associated circuitry for long-lasting use. Strengthening the device further, TMI also constructed the lower anvil and movable pressure foot from lapped, solid stainless steel.
With a precision digital linear encoder measuring system and an ultra-clear, easy-to-read display, TMI electronic micrometers are so simple to use. You can inspect each thickness measurement in real time on the digital readout.
Features & Benefits
Features & Benefits:
- Digital micrometer readout and superior mechanical design
- For use throughout the laboratory and production floor for measuring paper
- Uses the deadweight electronic micrometer principle
- Digital micrometer readings in microns, mils, millimeters or inches
- Zeros in on next dwell at the push of a button
- Serial output for simple data collection
- Powerful GraphMaster software compatible
- User configurable calibration menu
- Special anvil diameters and dead weight loads available
- Calibratable with certified gauge blocks
Technical Specifications
Applications: Adhesion Testing, Thickness Testing
Materials: Paper
Digital micrometer range: 0-0.050in. (0-1.27mm)
Resolution: 0.5micron (0.02mil)
Accuracy: 1.0micron (0.039mil)
Units: microns, mils, millimeters or inches
Dwell time: 2.0 +/- 1.0sec
Lowering speed: 1.0mm/sec
Speed tolerance: +-0.3mm/sec
Electronic micrometer power: 90-250VAC, 50/60Hz


